Termination Stud Systems

The Terminal Stud System works well where the turnbuckle “look” is desired or where double turnbuckles are required as in very long runs.. The ends that show are identical.

Termination Stud Turnbuckle
Common Specs
Thread
Body
Open
Closed
Cap Size
Wire Size
1/4-28
4-1/4″
10-1/4″
7-1/8″
9/16″
1/8″
1/4-28
4-/14″
10-1/2″
7-1/2″
9/16″
5/32″
1/4-28
4-1/4″
10-1/2″
7-1/2″
9/16″
3/16″
5/16-24
4-3/4″
10-3/4″
8″
9/16″
3/16″
5/16-24
4-3/4″
10-3/4″
8-1/8″
9/16″
1/4″
5/16-24
4-3/4″
10-3/4″
8/1/8″
3/4″
1/4″


1/4-28″
4-1/4″
10-1/4″
7-1/8″
9/16″
1/8″
1/4-28″
4-1/4″
10-1/2″
7-1/2″
9/16″
3/16″

Countersunk Termination Stud Turnbuckle
Common Specs
Thread
Body
Open
Closed
Cap Size
Wire Size
1/4-28
4-1/4″
11″
8″
9/16″
1/8″
1/4-28
4-/14″
11-1/8″
8-1/8″
9/16″
5/32″
1/4-28
4-1/4″
11-1/4″
8-1/4″
9/16″
3/16″


1/4-28″
4-1/4″
11-1/4″
8-1/4″
9/16″
1/8″
1/4-28″
4-1/4″
11-1/2″
8-1/4″
9/16″
3/16″

Attachment: Our Termination Stud System is very simple to setup and install. Simply drill holes in your verticals for the cable to pass through. The termination cap pulls against the last vertical to tension. Countersunk type termination studs use standard 82 degree countersink for a flush fit.

Other information: Our standard termination stud turnbuckle can be used for up to a 2” OD post on a level or angle run. Rods are also available for 6” and 12” posts.

For a quote call 952-470-0824 or email info@sightlinesmn.com or fax your drawings to 612-789-0614.