This is the assembly we recommend for stairs or for other runs with 2 angled terminations. The Deck Toggle will pivot to any angle and the other end of the cable can be bent where it enters the Receiver. The Invisiware Stud is machine-swaged onto the cable. Cut the cable to length, tighten on the Deck Toggle and tension the cable. The Deck Toggle attaches to the post with two ¼” screws which are included.
- Cable cutter
- #3 Phillips screwdriver
- 2 ea 5/16” open-end wrenches
- 3/16″ Allen wrench (included)