3/16" cable: Hayn-Grip deck toggle with Invisiware receiver

This is the assembly we recommend for stairs or for other runs with 2 angled terminations. The Deck Toggle will pivot to any angle and the other end of the cable can be bent where it enters the Receiver. The Invisiware Stud is machine-swaged onto the cable. Cut the cable to length, tighten on the Deck Toggle and tension the cable. The Deck Toggle attaches to the post with two ¼” screws which are included.

Required Tools:

  • Cable cutter
  • #3 Phillips screwdriver
  • 2ea 3/8” open-end wrenches
  • 3/16″ Allen wrench (included)